Shift =.05 does do something but the result still is not as expected.us.
Here's the results with a 2.7 KHz filter
First high cut maxs out a 2.0 KHz, low cut can go to zero.
High cut low cut
2.0 no effect
1.8 0-0.2
1.6 0-0.4
1.4 0-0.6
1.2 0-0.8
1.1 0-0.9
1.0 0-0.9
First, why is does high cut not go to 2.7 KHz? BW for this set of data
is 2.7 in the BW/SHIFT mode.
Second it does not appear that the high cut and low cut controls are
independent.
I'm curious about the reason for these observations.
73 de Brian/K3KO
On 3/20/2013 13:23, Joe Subich, W4TV wrote:
> Turn CONFIG:CW QRQ to OFF.
and/or reset CONFIG:SHIFT=0.01 to SHIFT=0.05
73,
... Joe, W4TV
On 3/20/2013 8:46 AM, Mike K2MK wrote:
Hi Brian,
Turn CONFIG:CW QRQ to OFF.
73,
Mike K2MK
alsopb wrote
I was doing something odd. Stock 2.7KHz filter, CW mode, V4.61.
Removed all equalization.
Wanted to adjust high cut or low cut. Tapped shift control. Did not
revert to high cut/low cut mode. Ditto for tapping width control.
Can't simulate this with shift because of it's limited range.
High cut/low cut works fine in SSB mode.
73 de Brian/K3KO
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2240 / Virus Database: 2641/5691 - Release Date: 03/20/13
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
