Cliff,
All Prosets are not the same. If it is a Proset-K2 or a Proset-iC (with
an electret element), turn bias on and try again.
If it is a Proset-HC4 or HC5 (dynamic element, bias should be off), the
output level is quite low, so you may have to set the mic gain quite high.
73,
Don W3FPR
On 4/1/2013 12:39 PM, ke0cp wrote:
Am I missing something or is there a problem when setting transmit mic level
(ALC) and compression in USB and LSB modes on my KX3?
I'm using a Heil Proset, get audio in the earphones while speaking into the
mic but cannot get any indication on either level meters no matter what CMP
or MIC levels I use. I have the latest firmware update installed.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
