That's normal, Steven. 8 cells at 1.35V (fully charged NiMH) equals 10.8 volts total.
73 Ron AC7AC -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Steven C Veal Sent: Sunday, April 14, 2013 7:40 AM To: elecraft@mailman.qth.net Subject: [Elecraft] Elecraft KX3 Internal NiMH Power Supply Voltage after Charge Hello group: Last night I installed new NiMH batteries (the Powerex 2700 MaH variety) into my week old KX3 for the first time and set them for a 12 hour charge. After the charge was complete, the KX3 PS display indicates a power supply voltage of only 10.8 volts, which drops to well below 10.0 volts on transmit. I'm sure that this is lower than it should be. I haven't re-opened the case to check for bad or ill-fitting cells yet as it is a little bit of a tricky open. So I guess the questions are these. 1) What voltage have other group members experienced with the internal NiMH PS after charge? 2) What charge duration are other folks using? Thanks in advance for your responses! Steve, N5SKH P.S. What a great radio... ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
