My KPA500 has been working - but had the intermittent hum issue; I took it apart; checked the nut tension; checked I had used the yellow wire; reassembled (including the lock-out switch - at least it was all there) and now it won't transmit.
Gets the pa key as an asterix shows up to the left of the frequency; it follows the K3; the K3 is fine; The K3 reports it on/off/standby etc. Heeeellllpp :-) thanks 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-not-working-tp7572838.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html