All,

   Quick question regarding SW updates for the KX3.   I
will be starting the construction of mine in a few weeks
(already have it in the box in the shack).

  When I update the SW do I have to download each and every
update in order, or can I just upload the latest revision
and get all of the previous updates ?

Thanks es 73,

    Gene K1NR

On Thu, 25 Apr 2013 12:58:16 -0700
 Wayne Burdick <n...@elecraft.com> wrote:
> KX3 beta firmware rev 1.44 (with DSP rev 1.16) is now
> available. See release notes below.
> 
> You'll need the KX3 Utility application to download and
> install firmware. For full instructions on loading beta
> releases, refer to our KX3 software page:
> 
>     http://www.elecraft.com/KX3/KX3_software.htm
> 
> Wayne
> N6KR
> 
> * * *
> 
> MCU 1.44 / DSP 1.16, 4-24-2013
> 
> * NOISE REDUCTION (NR) EASILY ADJUSTABLE: The overall
> level of noise reduction can now be set using the knob
> above the NR switch (AF/RF-SQL). When NR is turned on,
> the present setting will be displayed on VFO B for about
> 2 seconds. To select a new setting, rotate the knob
> before the display times out. The setting is independent
> for CW and voice modes. Note: The range of this parameter
> is 0-10, corresponding to the “mix” or “M” parameter of
> the RX NR menu entry. See below.
> 
> * RX NR MENU ENTRY CHANGES: The RX NR menu entry can be
> used to adjust all three NR parameters (B=beta, D=decay,
> M=wet/dry mix). The M parameter now has a range of 0-10,
> matching the range available when the knob above the NR
> switch is used (see above). As before, all parameters can
> be adjusted separately for CW and voice modes. In most
> cases the factory default settings can be used for beta
> and decay, and the mix adjusted for the desired overall
> amount of NR using the knob (without using the menu). You
> can also now reset all NR parameters to factory defaults
> by holding CLR.
> 
> * DVR PLAY/REPEAT FIX: DVR play no longer drops messages.
> 
> 
>
______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html

---------------------------------------------------------------------
Web mail provided by NuNet, Inc. The Premier National provider.
http://www.nni.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to