Tx gain cal should succeed as long as the SWR does not exceed 2.0:1. Can you turn on trace on the view menu and send me a trace of the failing calibration.
Dick, K6KR On May 23, 2013, at 16:36, peterc281 <peterc...@gmail.com> wrote: > I decided to run through the calibration of my K3 after it came back from the > VK9NT Dxpo. I find I can’t complete the transmit gain calibration as the SWR > is to high on some bands. > 1.8 to 10.1 are fine, the rest are as follows 14.1 is 1.5:1, 18.1 1.8:1, > 21.1 2.7:1, 24.9 2.2:1, 28.4 2.4:1, 50.1 1.3:1. > I’m after suggestions what to look for as I am not sure what could cause > this problem. > > 73 Peter VK3IJ > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-transmitter-gain-calibration-fails-due-high-SWR-tp7574132.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html