Aha. You caught something that needs fixing Gil. I'm not an Elecraft employee but do write some of their manuals. The 2" spec goes way back before the KAT500 was released. When the KAT500 came along, the engineers insisted the smaller spacing on top afforded by the KAT500 feet was adequate clearance.
73 Ron AC7AC -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Gillingham Sent: Monday, May 27, 2013 6:31 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KPA500 question about cooling Yes. The very first statement under Installation in the KPA500 owner's manual is the following: "IMPORTANT: Provide at least 2 inches (5 cm) clearance behind the fan and above the amplifier for proper air flow." Nuf said. 73, Gil, W1RG ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html