DIGOUT1 is saved by band *and* by antenna if one has the KAT3 installed. Be sure it is set ON for *both* antennas on six.
73, ... Joe, W4TV On 5/28/2013 8:39 AM, Mike Greenway wrote:
My K3 has the KAT3 and I am using the external PR6 via the RX ant. On 6 M if I have the antenna on Port 2 everything works correctly as the signal goes up in strength when I select RX bringing in the PR6. If the antenna is on Port 1 I get the opposite effect. The signal goes down at least 4 or 5 S units when selecting RX to bring in the PR6. Any suggestions? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html