topic is now cable ID:
I use colored electrical tape for cable ID. I know many use a label
with written ID, but have seen them become undecipherable with age
(especially sunlight exposure).
So I have been using colored tape.
white=600m
brown = HF
Blue=6m
green=2m
orange=222
red=432
yel-yellow = 900
yellow=1296
brown with band color = Rx
violet with a band color =Tx
as examples
I marked both ends of coax lines (I have 17 of them).
I also use a color code on control cables.
my 2m vertical polarity antennas=white
2m horizontal polarity antennas=blue
I have a station document book with diagrams color-coded for
reference (there is just too much to keep straight in my mind).
Note: only red fades in sunlight over time
73, Ed - KL7UW
http://www.kl7uw.com
dubus...@gmail.com
"Kits made by KL7UW"
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html