I use a Pixel Technologies RF PRO-1B magnetic loop with my K3 (and other receivers). How precisely you would connect it will depend on whether you have the second receiver installed, but the basic way is to connect to the RX Antenna port. You have a couple of options for feeding the second receiver, depending on how you connected the antenna input.
The Pro is very effective below 15M, allowing me to "null out" much of the urban noise I cope with. Highly recommended! 73, Mike Alexander - N8MSA ----- Original Message ----- From: "w9hak" <w9...@twc.com> To: Elecraft@mailman.qth.net Sent: Tuesday, June 4, 2013 8:51:56 PM Subject: [Elecraft] K3 using Pixel magnetic antenna Has anyone used the Pixel magnetic antenna with their K3? I am instrested in your results and how you attached the Pixel antenna to your k3. Smith Bradford W9HAK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
