The KAT3 handles the 100 watt output of the K3 with KPA3. 73 de Dick, K6KR
On Jun 22, 2013, at 8:00 PM, Jim Lowman <jmlow...@sbcglobal.net> wrote: > Sort of talking out loud here, but all opinions are welcome. > > As the subject says, I'm debating as to whether to buy the KPA3 module to > bring my K3 to 100w, or spend about twice as much for the KXPA100+ATU. > > The K3 and KX3 are so similar in specs and capabilities that I think I'll be > using the KX3 only for Field Day and other portable operation, with the K3 as > a home station. > But the KXPA100 offers the possibility to use it with my K2, K3/10 and KX3, > as well as other QRP radios in the shack, such as the FT-817 and the QRP++ > > Dumb question: I have the KAT3 ATU Installed in the K3. Will it handle 100w > if I upgrade to the KPA3, or will I have to replace it? I didn't see an ATU > with a higher power rating on the Elecraft order form. > > Thanks for any thoughts and 73 de Jim - AD6CW > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
