Roger, I would like to point out that I have been trying to encourage others to learn cw by using the keyboard to send perfectly spaced cw at set speeds. It has memories that can be used for this as well.
Dick, n0ce ----- Original Message ----- From: Don Wilhelm To: K8RS Cc: Elecraft Group Sent: Saturday, June 29, 2013 3:18 PM Subject: Re: [Elecraft] P3 and Keyboard Roger, If you mean PSK31 and RTTY modes, that will do it. BTW, P3 Utility is not the firmware itself, but a means of downloading and installing firmware updates - it runs on the computer, and is not needed once that task is completed. If you want other data modes, you will have to run the K3 in DATA A or AFSK A and use a soundcard oriented application on your computer. 73, Don W3FPR On 6/29/2013 3:50 PM, K8RS wrote: > What is needed besides the K3 + P3 with the SVGA board, a USB keyboard and the latest P3 Utility firmware to run the Data modes via the P3? > Roger K8RS K3 S/N 280, P3, KPA500 and KAT500 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html