Hi Don, Thanks for this. You were correct on two counts. Working through your list, I got as far as the KSB2 and, having subject that to a good wiggle, everything is working again.
Many thanks for your help...I won't forget that the connectors can cause problems and will check this kind of thing automatically next time I have a problem. Best wishes.....and yes, it was inside the box ;-) Denis MW0CBC / GW8OQV > Denis, > > From that information, all I can say with certainty is that the problem > is somewhere inside the enclosure :-) . > > My first guess is that one or more of the connectors on the option > modules has developed a bit of oxidation during its period of non-use. > I would remove and re-insert all the option modules. If you have the > KAF2 or KDSP2, I would start with that because it is directly in the > audio path, then proceed to the KSB2, then the KNB2, then K60XV if > installed and lastly the K160RX. > > If that does not help, please give a more complete description of what > you hear on RX - for example, do you hear receiver noise if you turn the > AF gain up? Does the noise level change with the preamp and attenuator > in and out? > > 73, > Don W3FPR > > On 6/27/2013 3:45 PM, ra...@modesgate.com wrote: >> Hi Folks, >> >> My K2/10 hasn't been used for a few months. It was working fine last >> time >> I used it. I turned it on a few days ago with the intention of taking >> it >> out portable and it's developed a problem. The display and all the >> controls seem to do what they usually do, in that frequency changes, >> antennas switch, volume goes up and down, bands and modes change etc. >> but >> it will neither transmit or receive. >> >> I would be very greatful if someone could give me a heads up on where to >> look first! I built this quite a few years ago and my memory of it's >> "internals" has faded considerably. >> >> Many thanks and best wishes from Wales. >> > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
