Mike,
Was that a plain USB soundcard, or is it a digital interface box (like
SignaLink, RigBlaster, etc.)?
If it is a digital interface box, most of those are set for microphone
level output, so dig into the documentation and find out how to set it
for Line Level output. Line level is 50 to 100 times the amplitude of
mic level.
73,
Don W3FPR
On 7/8/2013 4:53 PM, Mike Reublin wrote:
Thanks to some excellent suggestions, I was able to get receive working, but
transmit is still a no-go.
I cannot get an ALC indication. I've run the sound card volume up and down it's
range. I can hear the tones thru the K3 speaker, so they're getting in.
It's got to be something so simple I'll feel compelled to double dope-slap
myself.
Mike
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
