This was observed with KX3 Firmware 1.50. I found what I think may be a bug in the display code or the retention of the last-used data mode bandwidth for the KX3.
Steps to reproduce: 1. Tap DATA twice. 2. Select DATA A using [B]. 3. Widen the passband all the way to 4.0 with PBT I 4. Select any other mode with [B], like AFSK A. Passband display changes as expected. 5. Re-select DATA A. Result: The PBT indicator goes back to showing the full bandwidth, but the bandwidth in use is actually reduced to 0.50. Turning the PBT knob in either direction updates the display to what it should be showing. Expected result: re-selecting DATA A either uses the same bandwidth setting it had the last time it was selected OR the display updates to show that the bandwidth has been reduced to 0.50. I think if I had my druthers, I'd like to see it go back to using whatever bandwidth I'd last selected with the mode rather than reverting it to the default. Nick -- *N6OL* Saying something doesn't make it true. Belief in something doesn't make it real. And if you have to lie to support a position, that position is not worth supporting. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html