Hi Edward, Here's a few things to check.
Before you compare Main RX and Sub RX be sure to double tap A-B (#3 button). This insures that all the Main RX settings are transferred to the Sub RX. Things like NR, NB, and filter settings should be the same before making comparisons. Also with the SUB turned on check ATT and PRE using the BSET button to be sure they are the same as the Main RX. (I'm not sure if ATT and PRE are transferred to the SUB RX using the A-B double tap). Do you have the same filter in both RXs. Have you entered all the filter parameters correctly into the config files using the K3 Utility. The outer volume knob (Sub) can be configured to be a true volume control or a balance control using CONFIG:SUB AF. Check which you have chosen. 73, Mike K2MK Dauer, Edward wrote > Just finished the K3 and have it on the air. Neat! Much to learn yet. > Two questions at this point, and a request for advice from the group . . . > > First question: The AF gain for the subreceiver is markedly lower than > that for the RF board receiver. Anyone know what I might not have > configured correctly? The config AF gain setting doesn't change it - sub > still much lower than main. (The sub is on the shared antenna and the RF > sensitivity seems the same.) > > Second question: the K3-to-KPA cable takes up the same 15-pin port as the > PR6-10 is supposed to use (and a second cable from KPA to KAT uses up > everything else.) Any options for connecting the preamp other than doing > surgery on the cable? > > Many tnx for any advice anyone can offer . . . > > Edward Dauer, KN1CBR -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Subreceiver-AF-Gain-and-PR6-10-connection-tp7577827p7577831.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html