Sorry, I guess my frustration is with the limited documentation on the
P3 SVGA. Twice I thought it was defective but it wasn't.
So far I've found that the SVGA bias needs to be turned way down from
the default of 9.9 to 1.2-1.5, and that I'm losing simple serial data
from the K3 to the P3 SVGA on receive. I think this is a serial line
problem and Gary from Elecraft suggests turning down the rate from
38400.
Also, the USB keyboard I have (a Cooler Master I just got) doesn't
appear to work and I'm sure it's another problem on my side. Everything
else has been.
On Tue, 27 Aug 2013, Richard Fjeld wrote:
Paul, and others,
I think Hisashi is describing using RTTY what I have been talking about using
CW with a keyboard when I said that some
characters (not elements of the characters) are being lost during transmission.
They show on the monitor, but not on the P3 and
are not being sent.
At this point, I'm wondering if Hisashi is seeing this while transmitting? or
does he see it during receive? If during receive,
that would be a new problem.
Dick, n0ce
> Date: Tue, 27 Aug 2013 08:46:47 -0700
> From: ht...@twofifty.com
> To: k...@comcast.net
> CC: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] P3 SVGA RTTY decode question
>
> Once again, I wonder if I'm being clear. THE TEXT ON THE P3 SVGA IS NOT
> THE SAME AS ON THE K3. I'm not sure what the issue is.
>
> On Tue, 27 Aug 2013, Mike K2MK wrote:
>
> > Hi Hisashi,
> >
> > The P3/SVGA board is acting as a terminal. It does not do any decoding. It
> > just displays the decoding done by the K3. If you're missing characters you
> > may want to adjust the threshold on the K3. See the decode tips in the K3
> > manual on page 33.
> >
> > 73,
> > Mike K2MK
> >
> >
> > Hisashi T Fujinaka wrote
> >> I was copying RTTY on my P3 SVGA and I found that it was dropping a lot
> >> of characters. I finally figured out how to decode directly on the K3
> >> and it wasn't dropping characters at all.
> >>
> >> Is there something I have set up incorrectly?
> >>
> >> Thanks.
> >> Hisashi T Fujinaka
> >
> >
> >
> >
> >
> > --
>
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
