There seems to be two possible solutions for my amp-disabled problem:
1. Remove the wire to pin #10 from my homebrew cable, and still use the
RCA cable from the KAT500 to the SB220 amp.
2. Make a new cable from the SB220 to the 15 socket on the back of
the KAT500 marked "AMP", using pin #10 for the centre conductor of the
RCA cable and pin #5 to the shield/ground of the RCA cable.
(Suggested by Dick K6KR.)
Iain, your suggestion of removing the wire to pin #10 is the easiest option
for me,
but I will wait a bit to see what others say
73, Steve ZL2KE
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Made-a-DB15-cable-to-connect-K3-KAT500-but-now-Amp-is-disabled-tp7578367p7578393.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
