On 10/16/2013 6:35 PM, Joe Subich, W4TV wrote:
I would suspect a display problem with the Watts Up ... like showing
the wrong range. I *measure* 4.4 mA and 4.2 mA respectively on my K3s
- s/n 622 and 1450 - with my trusty Fluke 85.
You're right, Joe. I pulled out my Fluke and an adapter I had made years
ago for a current probe and measured both radios. Both are drawing 4 mA
when off, about 1.2A when on with one RX, about 1.5A with both RX on.
Thanks for the sanity check.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
