An interface can not generate PTT during CW if you are going to use "CW in SSB" with the K3. As soon as the external PTT is closed, the K3 switches into SSB mode (e.g., at most one dit or dah).
microHAM microKEYER II handles this condition correctly by suppressing PTT during CW if "CW in SSB" support is selected and the interface determines that the K3 is in USB/LSB by decoding mode from the CAT stream. 73, ... Joe, W4TV On 10/29/2013 3:13 PM, Bill Wiehe wrote:
OK. I just did some additional checking and it appears the my problem is not with the K3, but with the interface. My Navigator USB is not allowing the for transmit in SSB mode. I was able to confirm this by bypassing the Navigator and using the K3 internal keyer. All is well when operated in that configuration. Sorry to take up time and space here. On to the Navigator configuration site. Thanks, Bill - W0BBI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
