Yes, this is a very helpful menu item. I normally keep TUN PWR set at 20
watts, which allows amp tuneup to be started at lower power with less
likelihood of damage due to a switching or antenna mistake.
73, andy ae6y
-----Original Message-----
From: Mike Reublin
Sent: Friday, November 22, 2013 10:55 AM
To: pastor...@verizon.net
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K3 Power Changes When Driving My Amplifier
On the K3 check your CONFIG:TUN PWR setting against your power setting.
73, Mike NF4L
On Nov 22, 2013, at 9:43 AM, pastor...@verizon.net wrote:
Hi, this is Mark Griffin, KB3Z. I noticed last evening while on 40 meter
SSB that when driving my amplifier that I had the K3 set at 48 watts
input. As I was hitting the tune button I noticed that the reading on the
K3 was now at 50 watts. But, when I took the amplifier off line it was
back to 48. I guess I never noticed this before and maybe it's normal. Has
anyone else had this occur? And, if so, is there a fix for this? Thanks!
Mark Griffin, KB3Z
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
