There was talk by Wayne when the K144XV was introduced that the K144XV could
be wired for a separate 144rx ports, but I have seen nothing written up so
far.
I noticed that there was a 3 pin header (normally with jumper) near the
unused cable outlets marked "144IF" in the box cover. Investigation revealed
that by removing the jumper and connecting a coax centre conductor to the
centre pin of the 3 and the coax shield to the previously unused pin
(ground) I had a separate 144 receiver Input. I have an rg174 lead coming
out of the back panel, there is probably a prettier way!
Perhaps this will get "officially" written up some day?
Dave
Ww2r
From: "Lance Collister, W7GJ" <w...@q.com>
To: Joel Black <w4...@charter.net>, elecraft
<elecraft@mailman.qth.net>, elecraft...@yahoogroups.com
Subject: Re: [Elecraft] K144XV Option
Hello Joel,
However, it only has ONE coaxial connector on the rear of the radio, so you
lose the
ability to have a separate receive input like you can on all the other
bands. The
option for a 2m transverter set up is ELIMINATED when you install the
K144XV.
Hope this helps! GL and VY 73, Lance
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
