Gary,
Early KX3s had nuts on the encoder shafts which made the switch action
intermittent at times because the nuts interfered with full travel when
the knob was tapped.
So check for nuts on your encoder shafts - if present, remove them -
they are not needed.
73,
Don W3FPR
On 12/22/2013 12:41 PM, Gary Hawkins wrote:
Hi Dave,
Thanks for your response and, yes, this information is on page 15 of
the C2 manual as well. However, this tells you how the CMP/ALC
display mode gets activated. The problem I'm having is switching it
back to SWR/RF.
You should be able to do this by tapping the Keyer/Mic knob and this
is working here on the bench this morning, however, in the field
sometimes this does not seem to work and I end-up stuck in CMP/ALC
mode. It might be finger trouble on my end but this has happened
several times.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
