I'm unable to power up my KX-3 either with batteries (new) or AC supply. The batteries had been out for most of the winter and when I put in some fresh ones and turned the radio on I got some odd readings. Turns out the flexible cable between the halves wasn't properly seated. I fixed that and all was fine. About two weeks went by and today I decided to stop procrastinating and install the battery charger and roofing filter I'd ordered quite some time ago. Before I even got started, though, I tried to power up the radio but got nothing. I replaced the batteries, still nothing. I tried AC power...nothing. With the batteries in, there are two small LEDs, labeled 0 and 1, lit up toward the upper left of the Control Panel as it's pictured in the assembly manual (they are approximately behind the letter R in TRANSCEIVER on the front panel). That's the only sign of life in the transceiver. It says DEBUG under the LEDs, so they're probably the ones shown in the IF and Audio schematic of the Control Panel, being the lines labeled DBG0 and DBG1.
Any help would be much appreciated. Thanks. Dennis, N7DH ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
