Hi Jim, I'm not sure this will work, but try enabling RX ISO in the MENU.
73, matt W6NIA On Sun, 16 Feb 2014 17:15:18 -0800, you wrote: >I'm running the current firmware release in the KX3, the Mac OS is at 10.7.5. >I bring up NaP3 to see the CW signals on a band and I am seeing a "birdie" or >"spike" (or whatever you want to call it) right at the pitch offset frequency. >So, for example, with the KX3 pitch set to 550 Hz, and the KX3 sitting on >24.890.00, I'm seeing this thing at 24.890.55. I know absolutely it is the >pitch frequency, because I can press & hold CMP and change the pitch frequency >and the spikey guy moves with it. Fortunately I'm not talking about a 40db >over S9 signal - it is more in the order of about S3 or so. But it is enough >to be distracting when looking at the spanadapter and also enough to cover up >any "blips" from weak signals underneath it. When I turn on the waterfall view >on NaP3, I'm seeing a solid cyan line vertically right under that spike. > >I can move this spike to my "center line" by changing the global offset in the >Configure>Rig panel to what my pitch frequency is. But doing so causes me to >not be on a signal when I've clicked on it. Matt Zilmer, W6NIA www.elecraft.com 831-763-4211 x129 Skype: matt.zilmer ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
