Hi Troy, Questions:
1. Are you in SPLIT mode by any chance, with VFO B set to some mode other than SSB? 2. Do you have mic gain adjusted to the point of seeing 5 bars of ALC on the meter on voice peaks? 3. Do you have the SSB crystal filter's labeled offset entered in the CONFIG:FLn OFS menu entry? 4. If you set CONFIG:2-TONE to ON, exit the menu, and tap XMIT, do you see power output? (Turn it back off afterwards.) 5. Are there any error messages when you power-up the K3? The answers to the above might help us figure out what's going on. 73. Wayne N6KR On Feb 20, 2014, at 3:52 PM, "Troy,w6hv" <w...@verizon.net> wrote: > I have lost SSB again--however CW is still working fine. I can hear my > microphone in the monitor. This happened once before and I used the K3 > Utility and did the “Calibrate Transmitter Gain” and it restored SSB. > However, I can’t get it to work this time. > > I re-set up the Mic Gain and Compression Settings. No luck. > > I’ve contacted Elecraft support and Howard has been trying, but so far no > luck. Somehow I my config file must be wrong? > > Thanks for any help, > > Troy, W6HV > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
