Have you tried any testing with a 50 ohm dummy load?  After the KX3, after the 
KXPA, after the AL80b?  Seems like that would let you isolate who the culprit 
is. 

Just my $0.02

Brian. K0DTJ

> On Mar 9, 2014, at 18:07, rldil...@aol.com wrote:
> 
> 
> The high SWR happens even when the AL80b or Palstar tuner is not connected. 
> In other words when coax from the kpxa100 goes direct to the K4KIO Hexx beam 
> with nothing in between to confuse the amp except a barrel connector.
> 
> Yes you can drive a larger amp with the kx3 and KXPA100. It is covered on 
> page 19 of the manual in paragraph titled Keying an External Amplifier. 
> 
> 
> -----Original Message-----
> From: Dr. William J. Schmidt, II <b...@wjschmidt.com>
> To: rldillon <rldil...@aol.com>; elecraft <elecraft@mailman.qth.net>; KX3 
> <k...@yahoogroups.com>
> Sent: Sun, Mar 9, 2014 8:49 pm
> Subject: RE: [Elecraft] KXPA100 SN 707 Total Frustration with this Amp
> 
> 
> Am I reading this correctly?  You are driving an AL80B with the KXPA100
> being driven by the KX3?  That's quite imaginative if that's correct.  The
> SWR fault is coming from the AL80B input circuit not your antenna (the KXPA
> can't see the SWR on the other side of the AL80B).  probably something bad
> in the input circuit of the AL80B causing the high SWR...
> 
> 
> Dr. William J. Schmidt - K9HZ / J68HZ/ 8P6HK/ ZF2HZ
> 
> Owner - Operator
> Big Signal Ranch
> Staunton, Illinois
> 
> email:  b...@wjschmidt.com
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to