Richard, I run the expert amp 1K FA with the K3. I run the KAT3 in bypass mode 100% of the time. I also use the amp barefoot sometimes through the amplifier using its antenna tuner in line.
I am not completely clear on your line of questioning but feel free to contact me offline. 73, Keith AK6ZZ Sent from my iPhone please excuse typos > On Mar 10, 2014, at 9:40 AM, "Richard Thorpe" <kis...@me.com> wrote: > > I have my K3 driving an Expert Amp. I set the K3 (with the ATU out) at 25W on > each band to drive the Expert to full output. A lot of times I don’t want to > turn on the amp and use the K3 “barefoot” at 100W with the ATU switched in. > What is the simplest way to do this? I need to change the K3 power out for > each band, switch the antenna, switch in the ATU. Is there some simple way to > do this? Any suggestions would be appreciated. > > K6CG > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
