Not difficult,just involved.  A second DSP board needs to be mounted
to the front panel and a second VCO board needs to be mounted to the bulkhead. After that it's easy.

73,

   ... Joe, W4TV


On 3/27/2014 7:07 PM, Phil Hystad wrote:
I have heard a few stories about the difficulty of installing the KRX3 
sub-receiver into a K3.  Is there a consensus as to whether this is difficult, 
moderate, or reasonably easy straight-forward to install.

Thanks,

73, phil, K7PEH

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to li...@subich.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to