Bill, Thank you for your thoughts here! You inadvertently answered a question I was going to ask, about the K3 vs. the current Flex product. Thank you again!
I have a request in the Yahoo groups to join as well, so I should be able to get more data as needed. In my wanderings across the net looking for data on the K3, saw reference to bad audio on transmit from the K3, these were 2 year old posts. Was there an issue, or was it user setup, and if an issue, did Elecraft correct it? I saw some changes were made two the transmit audio, was this done to correct the issue, if there was an issue. Thanks again for your help! -- Support better RFI practices, please sign this petition: at Whitehouse.gov http://wh.gov/lpz5Y On Sat, 2014-04-05 at 16:31 -0400, Bill W2BLC wrote: > No doubt the blocking abilities of the K3 should be of interest to you > under those circumstances. > > I went through what you are doing a couple of years ago. Wound up trying > a FLEX, which lasted about three weeks before it was returned to the > manufacturer. My reason for return was a lack of proper product support. > I then borrowed a friends big TenTec. Great rig and good support - just > way too big physically. > > Then I started looking at the K3. Watch the groups and reflectors and > went to try a couple of them nearby. I was impressed by the rig - it did > as was advertised. So I bought a kit and spent a couple of days putting > it together. Got the Kady book to go with it (needed, as the Elecraft > manuals are not really deep enough). I built a rig as I wanted it with > accessories I chose - not what some bean counter thought I should have. > > The rig has not been a disappointment. I also have the remainder of the > K-Line (P3, KAT500, and KPA500). I had some teething problems with the > latter devices, however the latest firmware sorted all of that. > > The K3 is so user customizable from the various menu setting available, > that you will end up having a rig designed to your choices. By the way, > all those settings are generally made once and not touched again. Mostly > I turn the rig on/off, use the volume control, VFO, band, mode, and once > in a while adjust hi or lo cut - pretty simple to operate. > > When you have questions - there is a Yahoo Group and a super > reflector(as you have found). Also, company support is always just an > email or phone call away. Those folks know their products well and are > quick to respond when you need help. > > Did I mention this is a Made in USA product??? > > I am very pleased with my K-Line and will recommend it to anyone > desiring a top of the line HF rig/station. > > Bill K-Line > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to d...@nk7z.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com