I'm on 12M and I tune in a station and I see the peak'apex of that signal on the graph on the P3 but it is slightly lower than where it is the strongest on the K3. To hear the station loudest and keep the P3 indicator in place I need to adjust the shift one step lower than the FC asterisk is set at.
For example; the peak of the signal and the freq shown on the P3 are on 24.899.88 (the K3 reads 24.899.884) however, on the K3's CWT setting it is two marks to the left of center and the signal is audibly obviously low. If I turn the shift one click CCW I hear the station clearly. If I hit spot and tune to get the signal at its best the frequency of the K3 shifts to 24.899.958 and I hear the station as the expected but the apex of the signal on the P3 has shifted left. Another example: On the P3 , the apex of the stations signal is 28.019.90 the station is obviously low to my ears, the K3 reads 28.019.900 and the signal on the CWT reads2-3 marks low. I hit spot and the signal is exactly now right but the P3 now reads 28.019.96 and the K3 now reads 28.019.961 and the apex of the signal is obviously to the left of the marker where the K3 is set. Is there a calibration I've missed that I need to perform to get the K3 & P3 to be in sync? Thanks. Gary KA1J --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com