I use LDG tuners here with my K3. No interface cable is needed, just the
RF between the K3 and the LDG. When the LDG senses RF it will start to
tune. Press and hold XMIT to start the tune process, tap it again when
the LDG finds a match. I have both a 100 and 600 watt tuner, I always
reduce the power out from the K3 before tuning although with these
tuners I suspect it's not really necessary. The K3 reduces power on its
own when the SWR is too high and will bring it back up by itself when
the SWR falls below 3:1, so at least you're not slamming the LDG with
high power when the match is way off.
73, Dennis NJ6G
On 4/10/2014 8:11 AM, David Cole wrote:
Hello all,
Now that the K3 is ordered, (6 more days till I get it, and counting), I
am getting things ready for it.
I have an LDG AT-1000 PRO II tuner I used on my Icom Pro 3, post amp.
There was a nice cable for the Icom, so that all I had to do was to hit
the tune button on the Icom, and it would force the LDG into tune mode,
using the Icom as a signal source... Is there such a feature that can
be implemented on the K3 with the LDG AT-1000 PRO II tuner?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
