Thanks for the heads up on the BNC cables. I am not sure where I got
the one I am using. I will swap out the cable and see if the issue is
still there.
Mike W0MU
On 4/20/2014 12:49 PM, Dave Hachadorian wrote:
Try moving IF connector, P3 and K3 side, disconnect and connect
and check
presence of spurious signal. I did same problem and fixed
changing IF cable
with high quality cable and connectors.
In my experience, the I.F. cable between the K3 and P3 is quite
finicky when it comes to the quality of cable and connectors. I
have just replaced my two P3 cables with these:
https://www.cablewholesale.com/specs/10x1-01103.php
These cables have a copper braid and aluminum foil shield, the
molded transition from connector to cable looks beefy and solid,
and the connectors fit well. Prices and shipping are very
reasonable.
Thanks to Hank, W6SX, for pointing out cablewholesale.com as a
good supplier.
Dave Hachadorian, K6LL
Yuma, AZ ______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w...@w0mu.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com