I give up...didn't find any "Autoshift" in the menus of either the K3
or KX3. Is this about some other radio? Or is a feature of some
early vs of firmware long gone? I'll admit not updating the K3
lately (vs 4.81).
In doing frequency drift measurements I noted that Frequency seen in
USB mode is different than what is seen in CW mode. The shift
appears to be that of the sidetone frequency which I have set to
550-Hz for performing the temperature compensation procedure on the KX3.
To hear the test signal in USB I have to retune the VFO if I switch
from CW. I have a good ear for tone frequency so am able to tune in
the test signal in USB to match the CW sidetone frequency. That
requires moving the dial about 550 Hz. If on the wrong sideband you
will *not* hear it.
73, Ed - KL7UW
---------------------
From: Oliver Dr?se <dro...@necg.de>
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] CW on SSB
Message-ID: <5373de83.5090...@necg.de>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
And enable auto-shift in the menu when switching from CW to SSB and vice
versa, otherwise you will still have to retune to get signal into the
passband again.
73, Olli
Contest, DX & radio projects: http://www.dh8bqa.de
73, Ed - KL7UW
http://www.kl7uw.com
"Kits made by KL7UW"
Dubus Mag business:
dubus...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
