Hi Matt,
I've had the amp here for just over a week, and installed firmware 1.28
after I finished assembly. I do not have the built-in ATU and am running
the amp through a Kenwood AT-130 manual tuner. At this stage, I've only
used the tuner 'straight through' because the antenna is resonant at the
low end of 40m which is the only band I've used on-air.
I've been driving the amp with an Argonaut 539 set on 3 watts output,
which yields about 80W from the amp. The only connection between the 539
and the amp is a home-made keying line (coax). I've had one CW contact
and one SSB contact with nothing odd observed. The SSB contact was last
night for about 20 minutes which was to check if I had the radio and mic
behaving, and the report to me was all good.
After assembly last week, I did extensive checking of amp output into a
dummy load at various input power levels, up to 7 watts with the
attenuator in and out of circuit. Again, nothing unusual.
Could it be an ATU-related problem?
Cheers,
Bernie. VK2WJ.
Message: 24
Date: Sat, 17 May 2014 14:06:56 +1000
From: Matt VK2RQ <matt.vk...@gmail.com>
To: Ron Cowherd <roncowh...@aol.com>
Cc: Elecraft Reflector <elecraft@mailman.qth.net>
Subject: Re: [Elecraft] KXPA100 f/w 1.28 now production released
Message-ID: <91202e0b-924f-4cf9-9938-086ced910...@gmail.com>
Content-Type: text/plain; charset=us-ascii
Elecraft is right on top of it; I'm also confident we'll have a solution
fairly soon.
73,
Matt VK2RQ
> On 17 May 2014, at 1:52 pm, Ron Cowherd <roncowh...@aol.com> wrote:
>
> Yes, I have also had similar problems with the KXPA100 (SN#0876)and
have already composed and sent a letter to support. The letter is much
too detailed to reproduce here but I also suspected a firmware glitch.
My unit was working flawlessly until the upgrade. I'm sure the problem
will soon be solved.
>
> 73, Ron K4GYD
>
> Sent from my iPad
>
>> On May 16, 2014, at 6:56 PM, Matt VK2RQ <matt.vk...@gmail.com> wrote:
>>
>> How are people finding this new firmware?
[... remainder deleted by VK2WJ, a digest recipient...]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com