No. You need to select RX ANT on one RX and AUX on the other RX.
Otherwise you will hear the same signal in both ears, namely that of the
RX ANT input. ;-)
73, Olli - DH8BQA
Contest, DX & radio projects: http://www.dh8bqa.de
Am 22.05.2014 14:15, schrieb Don Wilhelm:
Ken,
Yes, that is how you would set it up - you need to select RX ANT for
both the ain and the SUB. And yes, you hear what is on the main in
one ear and what is on the SubRX in the other ear (unless you mix them
with the L-MIX-R settings in the CONFIG menu).
73,
Don W3FPR
On 5/22/2014 6:05 AM, Ken Widelitz wrote:
How would I set up the K3 in diversity mode with two different RX only
antennas? One to the RX antenna and one to the AUX RF? Would going into
diversity mode with that setup get me one RX antenna in one ear and the
other RX antenna in the other?
73, Ken, K6LA / VY2TT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to dro...@necg.de
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
