How are others using SO2R avoiding same band transmission and
subsequent receiver damage?

SO2R controllers like the microHAM MK2R+ have built-in "same band"
interlocks that prevent PTT if both rigs are on the same band or
if one rig stops responding to control polling.  Some of the "contest"
software also prevents selecting the same band on both rigs.

I have not seen any dedicated hardware that compares "band data" from
the K3 or Yaesu rigs and opens the PTT lines or asserts the inhibit
lines if both rigs are on the same band but it would not be difficult
to do so with a PIC or even a programmable gate array.

73,

   ... Joe, W4TV


On 2014-06-01 12:04 AM, Jeff via Elecraft wrote:

My station consists of two K-3's, each with a dedicated legal limit
amplifier and SteppIr antenna. To minimize interference between bands
I am using Array Solutions Bandpass filters. However, if both rigs
accidentally wind up on the same band I run the risk of overloading
the front end of the opposite rig and damaging the receiver (which
I've done once...). Does anyone have a way of taking the band data
information and disabling transmit capability on both rigs if they
are on the same band? How are others using SO2R avoiding same band
transmission and subsequent receiver damage? Anyone have any
experience with the Array Solutions AS-RXFEP front end protector?

Thanks, Jeff Larimore K0RG
______________________________________________________________
Elecraft mailing list Home:
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/mmfaq.htm Post:
mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net Please help support this
email list: http://www.qsl.net/donate.html Message delivered to
li...@subich.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to