The K3 has three external audio inputs: the front panel microphone jack,
the rear panel microphone jack, and the rear panel Line In jack. You can
use configuration settings to select among microphone input only (line
input muted), line input only (microphone inputs muted), or both
microphone and line inputs live at all times. Since the desired settings
are likely to be different between voice modes and data modes, the K3
remembers these settings separately in voice modes (SSB, AM, FM) vs.
audio-based data modes (DATA A, AFSK A).
In data modes, you would normally set MAIN:MIC SEL to LINE IN. When you
do this MAIN:MIC+LIN is automatically turned off (the display shows NOT
APPL). The microphone input is not live, i.e. you don't have to worry
about it when LINE IN is selected. You connect the sound card or other
interface to the rear panel Line In jack.
In voice modes, you would normally set MAIN:MIC SEL to fP or rP
depending on where your microphone is connected. If you are not using an
external voice keyer, you would set MAIN:MIC+LIN to OFF. If you are
using an external voice keyer connected to Line In, you would set
MAIN:MIC+LIN to ON, in which case the microphone and line inputs are
both live. This allows you to switch back and forth at will between the
voice keyer and microphone input, which is OK for voice modes using a
voice keyer to supplement live voice input, but not OK for digital
modes. If you insist on putting the radio in USB mode to operate digital
modes, you will be faced with a requirement for muting the microphone
during data transmissions.
This is just one among several reasons why it is recommended to use DATA
A mode in preference to USB mode when you are operating in digital modes.
73,
Rich VE3KI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com