Harlan, You should get 0.1 volts when you terminate your attentuator with 50 Ohms - are you probably using a high z voltmeter? The output of the attentuator can be seen as a 0.2 V voltage source with 50 ohms internal resistance - if you terminate it with a 50 ohms load, the 0.2 volts are divided between the internal resistance and the load, but if you use a high z termination instead, the voltage drop on across the high z is 0.2 volts...
Greetings Ralf, DL6OAP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
