Hi, The BW commands are incorrect. They should be in 10Hz increments. Thus for SSB you would want BW0210; not BW02100; Could be the reason. 73’s Tom
va2fsq.com On Jul 20, 2014, at 6:07 PM, Randy Diddel <k5...@arrl.net> wrote: > Good afternoon, > > I finally had some time to sit down with the Fred Cady Manual and the > Elecraft Programmer's guide. > > I operate mainly PSK/JT65 and phone and having the ability to quickly > change over to phone if there is rare DX (for instance) would be nice to > have. So I broke out the programmers guide and worked up the following: > > PF1 switches the radio to Data-A, Filter 4k, Mic gain to 20, power change > 15W, etc. > > The PF1 string is as follows: MG020;BW04000;AG005;MD6;DT0;PC015 > > PF2 switches to SSB: MG020;BW02100;MD2;PC100 > > (Yes, I do own a KXPA100) > > I have sucessfully assigned the macros to each PF. The problem is that I > push and hold either PF on the KX3 and it seems to execute part of the > macro but not all. To get it to fully complete, I have to press the same > PF key again and then all settings are correct. So my question is, is this > a bug, feature, or user error? > > Thanks and 73 > > K5RHD > > /randy > > BTW, I am still looking for a buyer for my K3 bundle-see post earlier this > week. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to tom...@videotron.ca ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com