It seems to me that using the two smaller packs would have some advantages for your application. They would each be able to power both the KX-3 and the amplifier, just for about half the time of the single larger battery. So you would have to switch over to the other battery at some point. But using two does offer redundancy in the event of a battery failure. Also, dividing the weight into two chunks may be advantageous for the folks who are humping them up the mountain.
73 Craig AC0DS On 4, Aug2014, at 10:01 AM, Jim Brown wrote: > On 8/4/2014 7:54 AM, Bob N3MNT wrote: >> I suggest using two 4S1P LiFePo packs, each being half of the desired >> capacity. > > Thanks -- but this application is to run both the KX3 and KXPA100. > > 73, Jim > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to cr...@powersmith.net > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
