Correction - I was just informed of the "error of my ways".
The K3EXTREF option is separate from the KXV3.
73,
Don W3FPR
----------------------------------------------
John,
That is already in place for the K3 with the External Reference (part of
the KXV3 option).
True that does not help with the XV series LO, and I am not certain
where another connector could be added to the KX3 unless the 2 meter
option were not installed and the SMA connector for that option were
used for the external reference option.
73,
Don W3FPR
On 8/18/2014 6:02 PM, John Lawrence via Elecraft wrote:
Focus Group Thoughts for Elecraft Re: KX3 and K3 drift on VHF Digital
Applications
What about adding an external phase lock option that would also allow
the 10 MHz reference phase lock and GPS sync? Many of the digital mode aps are
needing this kind of stability and the KX3 with an internal 2 meter board or
external XV transverter family choice. The XV series transverter LOs could
have a kit for phase lock too.
There are so many interested in WSPR and you have one of the gurus up north of
Elecraft who's already done a design. This also would bring the Elecraft
product up to what's new and state-of-the-art for both the K3 and KX3 in
digital communications....
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
