Hi, Wouldn't a receiver gain calibration procedure take care of the band to band variation?
AB2TC - Knut Don Wilhelm-4 wrote > Mike, > > The K3 S-meter response will vary with the pre-amp and attenuator > settings from band to band unless you have SMTR ABS set on in the menu. > If you are using SMTR ABS I suggest you calibrate the S-meter with the > PreAmp off rather than the PreAmp on. > > If you still have variation from band to band (using the XG3 for the > signal input), then you may have to set the S-meter calibration to a > compromise point. > > 73, > Don W3FPR > <snip> -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Receiver-S-meter-calibration-tp7592924p7592938.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com