See the K3 & KX3 Programmers Reference for the MN command - specifically MN023. You will also need to check the MP command for the specific states but something like MN023;MP001;MN255; should enable the KAT3 and MN023;MP000;MN255; should bypass the KAT3. Note I have not verified the specific MP values.
73, ... Joe, W4TV On 2014-10-09 2:56 PM, Vic Rosenthal K2VCO wrote:
I am pretty sure that there is no way to tell the K3 to bypass or enable the ATU in a macro command except by simulating the button press. Am I correct? What I want to do is make my "amplifier on" and "amplifier off" macros bypass the ATU when the amp is on but enable it when the K3 is directly connected to the antenna. Right now they just adjust the power output. The simulated button presses are not a good solution because you can't tell whether the tuner is off or on.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
