Hi Don,
   
  You nailed it I put T-7 in backwards.  <Duh!>.  As soon as I put it in 
correctly, well it sounds like a K-2 ought to.
   
  The K-2 was a Christmas gift from my XYL and I am enjoying the build.  With 
this problem solved Phase II of construction is complete.  I must call the 
House of Elecraft for more options so I can continue the experience.
   
  73,
  Joe N9JR

Don Brown <[EMAIL PROTECTED]> wrote:
  Hi

Double check T7. Make sure the green winding is in 1 and 2 and the red 
winding is in 3 and 4 closest to the IC U12. If it is backwards the 
sensitivity will be low, the audio will be low and the AGC will not work 
properly although everything else will appear OK.

Don Brown

KD5NDB


----- Original Message ----- 
From: "Joseph Reed" 
To: 
Sent: Wednesday, December 28, 2005 8:35 AM
Subject: [Elecraft] A question about low sensitivity


> Hi guys,
>
> Been a while since I last kept up with the list. You were a great 
> source of help back when I built K2 #1133. Now I have #5226 and have 
> completed the second section of construction. The receiver works, I can 
> hear stations on 40. Yesterday I listed to Mid-Cars, Southcars, and 
> Eastcars. But they were only moderatly loud and I had AF gain full out. 
> On the IC-756 Pro they were booming.
>
> On the radio I thought the AGC voltage might have been too high. 3.80 
> volts on the nose. T-34 tunes very well, as do L-1 and L-2. Every other 
> test and alignment to this point was well within specs. Any ideas as to 
> why it is not hearing well? Or should I not be concerned at this stage of 
> construction and press on to stage 3.
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft@mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
  

_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to