Oh no -- I'm not yet done with my K1, it appears.
I wondered why the pdf file below showed no photos
with the mounting of the board in the K1; then I
read "For the time being it is working perfectly
while wrapped in bubble wrap!" :-)
73, Phil W7OX
On 10/17/14, 7:21 AM, Don Wilhelm wrote:
Joe,
I have not tried it, but Davbe G4AON has written
a paper on his installation. You can see it at
http://www.cumbriadesigns.co.uk/images/X-Lock%20K1/X-Lock_K1.pdf.
It looks straightforward enough to me. I would
think you would have to adjust the VFO range
after installation, but that is easy enough to
do, just change the turns spacing on L1.
There are several reviews on eHam -
http://www.eham.net/reviews/detail/8437
73,
Don W3FPR
On 10/17/2014 9:48 AM, Joe W2KJ wrote:
Howdy fellow Elecrafters.
Would like to get in contact with anyone out
there who has interfaced a Cumbria Designs
X-Lock VFO stabilizer with a K1.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to w...@socal.rr.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
