Do you have a PX3? I was having problems like this until I spoke with Elecraft, and they had me keep the PX3 off until I kicked on the KX3, which then successfully powered on the KXPA100, at which point I power up the PX3 and everything works as intended. Something about passing through the control signals. I forget what firmware revisions I was on, I've made it a habit now so no idea if that's still the process.
David On Fri, Nov 7, 2014 at 7:18 PM, George via Elecraft < elecraft@mailman.qth.net> wrote: > I am using KX3 with the KXPA100 Amp. Lately when I turn the KX3 off and > then back on the menu shows PA OFF and I have to reset it to on. Then I > also > must turn the power setting back up to 100 watts. Any one else seen this > problem. I have the latest firmware installed. 73 George/W2BPI > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to orma...@corenode.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
