Hi,
Discovered the same a couple of days ago but hadn't got around to
investigating it. Don't know when it started but FWIW running 04.93
family firmware.
Regards,
Mike VP8NO
On 10/12/2014 22:46, Bert via Elecraft wrote:
It's been ages since I tried sending RTTY from my K3 using paddles; I've
been using a SignaLink USB for RTTY for the past couple years! Anyway, I set
up the K3 for FSK D, plugged the paddle into the paddle socket on the back
of the K3, and no RTTY!
So I checked cabling, etc., and still no RTTY using paddles. I switched
over to CW mode and CW worked just fine! Back to FSK D and no RTTY. I have my
call in an M1 macro, so I pushed M1 and got RTTY (text decoded properly!).
Then I tried the paddles again -- nothing! So I pressed M1 and after my
call was sent and the FSK was "diddling", my paddles worked! When the diddling
stopped, the paddles no longer produced RTTY.
What am I missing here?
Bert, N4CW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
