Also if the antenna is really flat - less than 1.2 when the tune operation
starts - - the KAT500 bypasses the tuning network.
AND if the SWR after tuning is worse than the antenna by itself - the KAT
will bypass. Those bypass settings are stored in memory .
That confused me until I RTM again-
Hank K7HP
-----Original Message-----
From: James Bennett
Sent: Thursday, December 18, 2014 11:17 AM
To: Elecraft Reflector Reflector
Subject: [Elecraft] K3/KAT500 Synchronization
Forgive me if this has been discussed (and answered) before but I do not
find it in the archives. A while back there was a firmware update that would
allow the KAT500 to “automatically” select the memorized L/C values as the
K3 was tuned across a band. I have the current firmware in both units, but
do not see (hear) the KAT500 doing anything as I tune across the band. For
example, I just set the K3 at 14.006 and tapped the key paddle. The tuner
clicked once and lit up the LED at the 1.2 mark. I then turned the K3’s VFO
knob up to 14.080 - not a sound to be heard while tuning. When I got to that
frequency, I tapped the key again and heard a short relay click noise and
again got the 1.2 LED.
So, my K3 and KAT500 are not doing what I thought the changed firmware was
supposed to do. Is this something I need to set in a menu parameter in one
or both units? Or, is this still a change residing in a beta version of the
firmware?
Thanks, Jim / W6JHB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pfizenma...@q.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
