Barry specifically said HC4/HC5 elements, and those are definitely
dynamic elements.
73,
Don W3FPR
On 12/24/2014 12:39 PM, Hisashi T Fujinaka wrote:
I replied directly to Barry, but I'm fairly certain the Heil element is
NOT dynamic and needs bias.
There's a jumper AND the menu setting. I forget what the defaults are
because I played with both to get this exact setup to work.
On Wed, 24 Dec 2014, Don Wilhelm wrote:
Barry,
I cannot comment on the RemoteRig setup because I do not have any
experience with it.
There are some statements that may require clarification - I think
the Heil document is somewhat confusing.
1) For a dynamic microphone, turn bias off.
2) The K3 (and K3/0 and mini) can turn bias on or off - so it is not
dependent on electret microphones such as the Elecraft MH2. The
choice of bias or not is a user choice in the menu.
3) The Heil microphone elements are relatively low output.
4) The K3 microphone "L" or "H" selection determines the gain of the
microphone preamp. "L" is low amplification, and "H" is higher
amplification. With Heil microphones, you may have to use the "H"
setting.
5) Try the "H" setting with bias off in the menu and see if you can
get the required 5 to 7 bars on the ALC meter.
73,
Don W3FPR
On 12/24/2014 1:30 AM, Barry Baines wrote:
I am having difficulties getting my Heil ProSet with the HC-4/HC-5 mic
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
